Table of Contents
Advertisement
mm CHAPTER 3 MECHANICAL SYSTEM
Vv
DRIVE
5)
Loosen 3 set screws @) with an Allen key.
1. Removing the X-axis Motor
1) Remove the left and left rear covers.
2)
Remove media retainer unit and media retainer
solenoid. (See page 3-18.)
3) Disconnect connector (J305) @ from the motor
controller PCB.
Figure 3-503
6) Remove 4 mounting screws ® and remove X-
axis motor ©.
Figure 3-501
4)
Remove 2 mounting screws @ and remove
gear @.
SVL
Figure 3-504
@
Figure 3-502
Advertisement
Table of Contents
