Canon BJ-W7000 Service Manual page 132

mm CHAPTER 3 MECHANICAL SYSTEM
5) Remove 2 mounting screws @). While sliding 7) Disconnect 2-pin relay connector @ from wiper
the cap holder unit @ by hand, remove blade solenoid 1.
mount 2 @).
les eo Me AL
Zz
Figure 3-310
8) Remove 2 mounting screws ©) and remove
Figure 3-308 blade mount 1 ®.
6) Remove 2 mounting screws © and remove
wiper solenoid 2 ©. eae ate :
a 3
=| ae
8
| SH a
Figure 3-311
Figure 3-309