Rear Panel - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Panel description

■ Rear panel

[GND] TERMINAL ����
1
[DC] JACK �������
2
[LAN] PORT
3
(RJ-45 type) �������
[WAN] PORT
4
(RJ-45 type) �������
1 2
Connect to ground.
Connect the supplied power adapter.
Connect a network device such as a Switch.
q w
Connect a bridge modem (ADSL, VDSL, or CATV) or FTTh terminal.
q w
L To use the [WAN] port, the [Line Type] setting is required.
(Router Settings > WAN > Connection Type)
See the Operating guide for details.
3
Lights: Connected
Blinks: Communicating
q Green: 1000BASE-T/2.5GBASE-T
w Orange: 100BASE-TX
Lights: Connected
Blinks: Communicating
q Green: 1000BASE-T/2.5GBASE-T
w Orange: 100BASE-TX
1-4
4