Table of Contents
Advertisement
2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
■ Registering the WLAN transceivers
Register a WLAN transceiver or the IP100FS to the Controller.
1
Open the Transceiver Registration screen.
(Transceiver Controller > Transceiver Settings > Transceiver Registration)
2
In [Transceiver Settings], enter the Transceiver Model, Name, and unit ID (00001 ~ 60000), and then
click <Add>.
L Click <OK> if a confirmation message is displayed.
3
In Transceiver Setting Entry List screen, confirm the entry.
Using TRX Batch Setting
you can register 2 or more transceivers at once in sequential TRX numbering, or copy the settings from an
already entered WLAN transceiver settings. Enter the range of TRX numbers that you want to copy to, select
the TRX number of the original, and then click <Add>.
The Profile ID that is
entered on the Profile
screen.
2-5
1 Enter
2 Click
Confirm
1 Enter
2 Click
Advertisement
Chapters
Table of Contents
