Setting The Common Id List And Messages In The Group - Icom IP1100CV Installation Manual

2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
Transceiver Controller > Common Settings > Profile

■ Setting the common ID List and Messages in the group

you can set the ID list and messages that are commonly used by the WLAN transceivers in a particular group.
L After completing the settings on this screen, restart the transceiver to apply them.
1
Open the Profile screen.
(Transceiver Controller > Common Settings > Profile)
2
In [No.], select a setting group number that you want to use.
L The group number is one that is entered on the Transceiver Registration screen.
3
Select ID List and Message List numbers that you want to use in the setting group.
4
Click <Apply>.
5
Confirm the entry in [Profile List].
Select the specified ID list group on "ID List"
screen or message group on "Messages" screen.
2-13
Select
Click
Confirm