Area Calls - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Feature description

■ Area calls

Area calls are used to call WLAN transceivers in a specific area.
To use Area Call function, enable [Area Call] for each WLAN transceiver on the Transceiver Settings screen,
and then register the area's wireless access point (BSSID).
(Transceiver Controller > Transceiver Settings > Transceiver Settings > Function Settings > Area Call)
(Transceiver Controller > RoIP Server Settings > Area Call > Area Setting)
Making an All Call with the Area Call function
IP1100CV
IP110h
All call
(For the IP100FS) Making an All Call with the Area Call function
Sales Accounts
Wireless
access point
Parts
1-12
(Default: Disable)
Select wireless access points
(for example, Sales and
Accounts) that the IP110h uses
to make Area calls, on the [Area
Call] screen.
On the IP100FS, you can make
an Area Call to the WLAN
transceivers that belongs to the
specified wireless access point.
Select an access point in
[Location], and then Call Type
(Individual, Group, All, Area, or
Telephone) and the name of the
destination will be displayed.