Bridge Connection And Caller Settings - Icom IP1100CV Installation Manual

2
SETTING uP ThE SySTEM

Bridge connection and Caller settings

When making a bridge connection with the VE-PG3*, the IP1100CV system can communicate with the transceivers.
* The VE-PG3 with a firmware version 1.13 or earlier cannot communicate with the IP1100CV system.
Before connecting the VE-PG3, check the firmware version on the VE-PG3's setting screen.
IP1100CV
192.168.0.1
IP100H
Sales1
00001
About the IP1100CV settings
1
Enter the IP address of the VE-PG3 in [Telephone Gateway Interconnection]. (Example: 192.168.0.2)
(Transceiver Controller > RoIP Server Settings > Telephone Gateway Interconnect)
2
After setting "Call Type" to "Telephone," select "Telephone Gateway Interconnection Number" and then
enter a telephone number in "Destination Phone Number".
(Destination Settings > Destination Settings)
• Select the bridge number as same as the number that is selected in [Telephone Gateway Interconnection].
(Example: 1)
• Enter the VE-PG3's extension number. (Example: 500)
3
After setting "Call Type" to "Telephone," enter "Destination Phone Number" and click <Apply>.
(Transceiver Controller > Common Settings > ID List)
• Enter the VE-PG3's extension number. (Example: 500)
Bridge connection
Wireless
IP110H
access points
Sales2
00002
Seles group1
00011
Extension number 2001
2-20
VE-PG3
(RoIP Gateway)
192.168.0.2
IP phone
Extension number 500