Table of Contents
Advertisement
2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
Transceiver Controller > Common Settings > ID List
■ The ID List
Enter names, call types and so on into an ID list that the WLAN transceiver will use.
L Set "use ID List" to "Enable" to use the ID list.
(Transceiver Controller > Transceiver Settings > Transceiver Settings > Transceiver Settings)
L After completing the settings on this screen, restart the transceiver to apply them.
1
Open the ID List screen.
(Transceiver Controller > Common Settings > ID List)
2
In [ID List Common Settings], select an ID list common setting number (Example: 1) that you want to
register.
L you can enter up to 300 ID List Common Setting groups.
3
In [ID List], click "Select From List," check the IDs that you want to add to the ID List, and then click
<Apply>.
4
After registration is finished, confirm the registered contents in the [ID List Entries].
2-10
Select
1 Click
2 Select
3 Click
Confirm
Advertisement
Chapters
Table of Contents
