Accessing With Telnet/Ssh; Accessing The Controller With Telnet/Ssh; About Telnet/Ssh Commands - Icom IP1100CV Installation Manual

4
FOr yOUr iNFOrmATiON

Accessing with Telnet/SSH

■ Accessing the Controller with Telnet/SSH

Use Telnet according to your OS or Telnet/SSH client.
L you can not access from the Telnet client because the "Telnet" setting of the Controller is disabled by default. Enable it
to access from the Telnet client. (management > management Tools > Telnet/SSH)
L The Controller supports UTF-8 character codes. Use a terminal software that supports UTF-8.
How to login:
1. Enter the login name, and then push the [Enter] key to log in.
Login: admin (Fixed)
Password: Enter the administrator password set on the Administrator screen.
(management > Administrator > Administrator Password)
2. When Telnet/SSH is successfully connected to the Controller, "iP1100CV>" is displayed.
Saving the setting:
After making changes, enter "save," and then push the [Enter] key.
How to log out:
Enter the command "quit," "exit," or "logout" to log out from the Controller.

■ About Telnet/SSH commands

Command list �������
Command help ������
Automatic complement ��
Push the [Tab] key to display the Telnet command list. After typing a
Telnet command, push the [Tab] key to display the subcommand list.
Enter " ?" after a command to display the command description.
(Example) "save ?" ("save" command description is displayed.)
After typing the first few characters of the command, push the [Tab] key.
The rest of the characters for the command are automatically entered.
(Example) "n" + [Tab] → network
Suggested commands are displayed.
(Example) "res" + [Tab] → reset restart
4-4