Restoring The Settings From The Usb Flash Drive - Icom IP1100CV Installation Manual

3
MAINTENANCE

Restoring the settings from the USB flash drive

Management > Settings Backup/Restore
You can copy a Controller settings to use to clone another gateway, with a USB flash drive.
First, save the settings data of that you want to copy from onto the USB flash drive, then load the settings to
another Controller.
1
Insert the USB flash drive to your PC.
2
Access the setting screen of the Controller.
3
Open the Settings Backup/Restore screen.
(Management > Settings Backup/Restore)
4
In [Settings Backup], click <Backup>.
• The setting is saved to a file "IP1100CVvXXX_yymmdd.sav" in the Download folder on your PC.
The product name, version and saving date are displayed as the file name.
5
Click the folder icon to open the "Download" folder.
Model name, firmware version, and the date is displayed as the file name
6
Move the downloaded backup file to an appropriate folder of your USB flash drive.
Click
3-13
Click
(☞ Continued on the next page)