The Transceiver Settings - Icom IP1100CV Installation Manual

2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
Transceiver Controller > Transceiver Settings > Transceiver Settings

■ The Transceiver Settings

Set up each registered transceiver.
L After completing the settings on this screen, restart the transceiver to apply them.
1
Open the Transceiver Settings screen.
(Transceiver Controller > Transceiver Settings > Transceiver Settings)
2
In [Transceiver Settings], select the unit ID that you want to set up, and then enter the required settings.
3
Click <Apply>.
4
Confirm the setting in [Transceiver Setting List].
2-7
1 Select
2 Enter
Click
Confirm