All Calls And Group Calls - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Feature description

■ All Calls and Group Calls

All Calls are used to call all the WLAN transceiver and IP100FS that are registered on the [Transceiver
Registration] screen.
(Transceiver Controller > Transceiver Settings > Transceiver Registration)
Group Calls are used to call a group of WLAN transceivers and IP100FS.
You can make a group on the [Destination Settings] screen, and pick up IDs from the ID List that you want to
register into the group.
(Destination Settings > Destination Settings)
L The ID List and the destination settings set in the IP1100CV are commonly used in each group that the WLAN
transceivers and IP100FS belong to.
You can select Simplex or Full-Duplex communication for All Calls and Group Calls.
Simplex operation
• The called station cannot reply until the caller station stops transmitting.
Wireless
access point
IP110h
Full-Duplex operation
• Caller and called stations can simultaneous receive and transmit just like a telephone call.
Wireless
access point
IP110h
IP1100CV
IP100FS
(Remote communicator)
IP1100CV
IP100FS
(Remote communicator)
1-8