About The File Names; The Settings Backup Files - Icom IP1100CV Installation Manual

3
MAINTENANCE
Automatic Restoring from a USB flash drive

■ About the file names

The files that are saved on a USB flash drive for the automatic restore function must be named as follows:
• Settings file: savedata.sav
L Only the settings file that is saved on the IP1100CV setting screen can be used for the Automatic Restore function.
(Management > Settings Backup > Settings Backup)
• Firmware: firmware.dat
L Use the downloaded firmware from the Icom web site.
Download the firmware file, extract it, and then rename the file to "firmware.dat".

■ The settings backup files

When restoring the setting data from a USB flash drive to the Controller, its original settings are automatically
saved as "bakdata.sav" onto the USB flash drive, as a backup.
The latest 11 backup files (revisions) are stored on the USB flash drive, as the file name "bakdata_X.sav"
(X=Revision number.)
(Example) The latest backup:
The second backup:
The third backup:
The oldest (11th) backup: bakdata_10.sav
L If the content of the settings file is the same as the Controller's current settings, no setting backup file will be saved.
L The firmware is not backed up.
L When a Controller setting has been changed, the original settings are automatically saved onto the USB flash drive, if it
is inserted into the IP1100CV.
bakdata.sav (without a revision number)
bakdata_1.sav
bakdata_2.sav
: :
3-11