Additional Controller Link With Ve - Icom IP1100CV Installation Manual

2
SETTING uP ThE SySTEM
Bridge connection and Caller settings
■ Additional controller link with VE-PG3
The Additional Controller Link function allows you to communicate with the digital transceiver in the IDAS
system.
L up to 10 sub IP1100CVs can be connected to the master IP1100CV.
L use the VPN function, if necessary.
IP100H and IP110H make Group Call with the Additional Controller Link (VE-PG3)
Additional Controller Link
IP1100CV
Controller connection
192.168.0.3
(Area B)
IP100H
Sales31
Sales group3
00031
About the IP1100CV setting
1
Select "Master" in [Controller Mode].
Then click <Apply> to reboot the IP1100CV.
(Transceiver Controller > RoIP Settings)
L When several IP1100CVs are linked and use All call or Group call between the controllers, the IP1100CV whose
Controller mode is set to "Sub" cannot link to the bridge mode's VE-PG3 to additional controller.
In that case, the VE-PG3 must be linked to the IP1100CV whose Controller mode is set to "Master."
2
Enter a name and a destination IP address. (Example: VE-PG3 (Area-A))
(Transceiver Controller > RoIP Server Settings > Additional Controller Link)
(RoIP Gateway)
192.168.0.2
IP110H
Sales32
00032
00301
VE-PG3
[D-TRX1]
[USB]
(Area A)
CT-24
Port number (Controller 1): 21500
Port number (D-TRX1):
2-24
Repeater A
P 0 P 1
P 2
P 3
P 4
192.168.0.11
21502
Transceiver