Connecting The Cables And The Pc - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Installation and connections

■ Connecting the cables and the PC

Connect to the power supply
2
To an AC outlet
To a
ground
BC-207S or BC-236
AC adapter
terminal
( Purchase Separately)
NOTE: Use the supplied clamp to fix the power cable to the ground
terminal.
Connect cables
1
1-18
Check the [LAN] port indications
4
L use a LAN cable of category 5e or higher
Lights: Connected
Blinks: Communicating
q Green: 1000BASE-T/2.5GBASE-T
w Orange: 100BASE-TX
q w
(IP address example : 192.168.0.1)
Turn ON the PC
3
PC for setting up the Controller
(IP address example : 192.168.0.100)
Power adapter cable
IP1100CV
Set screw
Clamp