Table of Contents
Advertisement
2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
Transceiver Controller > Common Settings > Messages
■ The Messages
Enter messages that the WLAN transceiver will transmit.
L Set "Message" to "Enable" to use the Message.
(Transceiver Controller > Transceiver Settings > Transceiver Settings > Transceiver Settings)
L After completing the settings on this screen, restart the transceiver to apply them.
1
Open the Messages screen.
(Transceiver Controller > Common Settings > Messages)
2
In [Message Group], select the Message Group number (Example: 1) that you want to enter messages
into.
3
In [Message List], enter a message of up to 32 characters, and then click <Apply>.
L up to 10 messages can be entered into each Message Group.
2-11
q Enter
w Click
Advertisement
Chapters
Table of Contents
