Talkgroup Calls - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Feature description

■ Talkgroup Calls

Talkgroup Calls enables WLAN transceivers to select the group that belong to it from previously registered
groups in the IP1100CV.
When users select Talkgroup 01000, terminals are excluded from the original groups, as illustrated below.
When no Talkgroup is selected:
00001 00002
Talkgroup 01000
All
When a Talkgroup is selected:
00001
Talkgroup 01000
00004
All
• Talkgroup Calls require registering the Talkgroups in the [Destination Settings] screen and [ID List] screen. If the
"Talkgroup Type" in the [Destination Settings] screen is set to "Multiplex Talkgroup," a WLAN transceiver can make a
Talkgroup Call between the linked Talkgroups.
(Transceiver Controller > Common Settings > ID List)
(Destination Settings > Destination Settings > Destination Settings > Talkgroup Type*)
*Displayed only when [Call Type] is set to "Talkgroup."
• Set to the Controller whether All Call includes the Talkgroup or not, or the Talkgroup Call calls the IP100FS or not.
• The ID List and the destination settings set in the Controller are commonly used in each group that the WLAN transceiver
and IP100FS belong to.
Group 00100
00003 00004
Group 00100
00002 00003
00009
00006
Group 00101
00006 00007 00008
Talkgroup 01001
Group 00101
00007 00008
Talkgroup 01001
1-9
00009