Setting A Static Ip Address To A Pc - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Installation and connections

■ Setting a static IP address to a PC

To access the IP1100CV setting screen from a PC, set a static IP address to the PC.
L As the default for the IP1100CV, the IP address is set to "192.168.0.1," and the DhCP server is set to "Disable."
The following steps shows how to set a static IP address (example: 192.168.0.100), based on Microsoft
Windows 10.
1
Click <Start> (Windows logo) and then click [Settings].
2
In "Windows settings" window, click [Change adapter options].
3
Right-click "ethernet," and then click "Properties" in the displayed menu list.
4
If the "user Account Control" message is displayed, click <Yes> to continue.
5
In the [ethernet Properties] (for a cable LAN station) or the [WiFi Properties] (for a wireless LAN station)
screen, select "Internet Protocol Version 4 (TCP/IPv4)," and then click <Properties>.
• The "Internet Protocol Version 4 (TCP/IPv4) Properties" screen is displayed.
6
Select "use the following IP address" and enter the IP address (example: 192.168.0.100) and the Subnet
mask (example: 255.255.255.0), and then click <OK>.
7
Close the window.
1 Right-click
2 Click
1 Select
2 enter
If necessary, change the PC's IP address
after setting up the IP1100CV.
3 Click
1-17