Resetting On The Setting Screen - Icom IP1100CV Installation Manual

3
MAINTENANCE
Resetting to the factory defaults
Management > Factory Defaults
When you can access the setting screen with the IP address and the administrator's password, you can
restore all the default settings from the setting screen.
If the IP address and the password are unknown, see the previous page.

■ Resetting on the setting screen

1
Open the Factory Defaults screen.
(Management > Factory Defaults)
2
Select "Restore all settings to factory defaults," and then click <Restore>.
• The confirmation dialog is displayed.
3
Click <OK> on the confirmation dialog.
• The Controller restarts to restore the settings. It may take several minutes to completely reboots.
CAUTION: DO NOT turn OFF both the IP1100CV and the PC while the IP1100CV is restoring or
rebooting.
4
After the Controller has completely rebooted, click "[Back]" (the red text on the screen) to return to the
setting screen.
Factory Defaults options
• All Settings: Restores all the settings to the factory defaults.
The IP address of the IP1100CV will be reset to "192.168.0.1."
• V/RoIP Settings: Restores the factory defaults other than the settings in the Network Settings, Router
Settings, and Management menus.
The settings for the WLAN transceivers will be reset.
Click
3-5
1 Select
2 Click