Online Update With The <Update> Button - Icom IP1100CV Installation Manual

3
MAINTENANCE
Updating the firmware
Management > Firmware Update
■ Online update with the <UPDATE> button
You can check whether a new firmware version is available or not by pushing the <UPDATE> button on the
front panel of the Controller.
The [MSG] indicator on the front panel of the Controller lights green if the firmware is ready for an online
update.
1
Hold down <UPDATE> with a pin until the [MSG]
indicator blinks green.
2
After the [MSG] indicator blinks green, release
the <UPDATE> button.
• The Controller starts downloading the new firmware,
automatically installs it, and reboots.
L Restart your PC after the Controller has completely
rebooted.
Hold down
with a pin
Release
L The other indicator status other than [MSG] differ,
depending on your system environment.
3-9
[POWER] lights green
[MSG] lights green
[POWER] lights green
[MSG] blinks green
All indicators light orange
[POWER] lights green after rebooting