Online Update - Icom IP1100CV Installation Manual

3
MAINTENANCE
Updating the firmware
Management > Firmware Update

■ Online update

You can automatically check whether a new firmware version is available or not by pushing the <UPDATE>
button on the front panel of the Controller.
The [MSG] indicator on the front panel of the Controller lights green if there is an Online update.
Information
• The DNS and the default gateway must be set to the Controller in order to use the Online update through the Internet.
• Before the Online update, we recommend that you save your Controller settings for a backup.
1
Open the Firmware Update screen.
(Management > Firmware Update)
2
In [Online Update], click <Check> to check if there is an available firmware update.
L If there is no update, "No Firmware update" is displayed or the [MSG] indicator does not light.
3
Click <Update Firmware>.
• The Controller starts accessing the Icom server to download the updates.
L Depending on the firmware version, the Controller may require that you initialize the settings.
Before the Online update, we recommend that you save your Controller settings for a backup.
4
After the update is complete, click [Back].
• Returns to the setting screen.
If the setting screen is not displayed, the update may not be completed. Wait for a few minutes, and then click
[Back] again.
3-8
1 Click
2 Confirm
Click