Table of Contents
Advertisement
1
BeFORe uSING The CONTROLLeR
Feature description
■ Status Settings
The Status function is used to show your status information (example: Meeting).
• You can preset 10 status texts of up to 32 characters on the [Status] screen.
(Transceiver Controller > Common Settings > Status)
Sending status on the IP110H
IP1100CV
Status selection screen
(Sender)
On the IP1100CV
On the Controller, you can check the Status of each WLAN transceiver on the [Transceiver Management]
screen. (Transceiver Controller > Transceiver Management)
Wireless
access point
IP110h
On the IP100FS, One-Touch button
Displays Name, Destination ID, Status
number, and the Status information
1-14
(Default: Disable)
Advertisement
Chapters
Table of Contents
