The Talkgroup Call - Icom IP1100CV Installation Manual

2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
Destination Settings > Destination Settings

■ The Talkgroup Call

you can join a Talkgroup by selecting it from the preset Talkgroups on your WLAN transceiver. you can make
a call to the selected Talkgroup.
L you have to set about the Talkgroup Call and enter Talkgroup IDs to your phonebook.
L After completing the setting on this screen, restart the transceiver to apply them.
1
Open the Destination Settings screen.
(Destination Settings > Destination Settings)
2
In [Destination Settings], enter Name, Call Type, and Talkgroup ID (00001 ~ 60000), and then click
<Apply>.
3
Confirm the setting in the [List of Destination Setting Entries (Talkgroup Call)].
When the Talkgroup Type is set to
"Multiplex Talkgroup," you can make
calls to 2 or more Talkgroups.
2-9
1 Enter
2 Click
Confirm