2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
■ Checking the WLAN transceiver settings
After registering the WLAN transceiver (Example: IP110h) to the Controller, enter the required settings of the
IP110h on the PC, using the CS-IP110h
.
programming software
After the settings on the programming software have been applied to the WLAN transceiver, restart the WLAN
transceiver to connect to the Controller to receive the settings from it.
When the WLAN transceiver settings are successfully completed, the transceiver will display the standby
screen.
Standby screen
2-6