Priority Call And Its Priority - Icom IP1100CV Installation Manual

1
BeFORe uSING The CONTROLLeR
Feature description

■ Priority Call and its priority

The Priority Call function is set to "Disable" in the default setting.
The priority levels of the Call types are in the following order.
Priority level Priority
high
Fixed
Selectable*
Low
* Selectable in the Call Type Priority item on the [RoIP Server] screen.
(Transceiver Controller > RoIP Server Settings > RoIP Server)
• The call priority between the same priority level depends on the incoming order.
• The priority of the reply call depends on the caller's priority level.
Priority call interruption example:
IP110h
Call type
Telephone
emergency (high)
emergency (Normal)
All Call (high)
Individual Call (high)
Group Call (high)
All Call (Normal)
Individual Call (Normal)
Group Call (Normal)
IP1100CV
Wireless
access point
Group call
Priority Call
— For telephone communication
enable —
Disable —
enable Includes the Area Call or calling from an IP100FS
enable Includes from an IP100FS
enable Includes the Area Call or calling from an IP100FS
Disable Includes the Area Call
Disable —
Disable Includes the Area Call
An Individual call
(high priority) has
arrived
1-11
Remarks
Individual call