Table of Contents
Advertisement
2
SETTING uP ThE SySTEM
Configuring the WLAN transceiver system
Destination Settings > Destination Settings
■ The Group Call
When registering WLAN transceivers or IP100FSs to a group, you can communicate in Full-Duplex, between
three or more members in a conference call mode.
L you have to enter a Group and the Phonebook on the setting screen to make a Group Call.
L After completing the settings on this screen, restart the transceiver to apply them.
1
Open the Destination Settings screen.
(Destination Settings > Destination Settings)
2
In [Destination Settings], enter Name, Call Type, and Group ID (00001 ~ 60000), select the target WLAN
transceivers to add to the Group, and then click <Apply>.
3
Confirm the setting in the [List of Destination Setting Entries (Group Call)].
2-8
1 Enter
2 Select
3 Click
Confirm
Advertisement
Chapters
Table of Contents
