1
BeFORe uSING The CONTROLLeR
Feature description
■ Simplex and Full-Duplex communication
The Controller has two methods of communication, Simplex and Full-Duplex.
Simplex is for communications where receive and transmit are done alternately one by one, and Full-Duplex is
for simultaneous receive and transmit just like a telephone call.
Set the Communication Method in "Transceiver Settings" for each IP communication terminal registered to the
IP1100CV.
Simplex and Full-Duplex
IP110h
■ The VOX function
The VOX function allows you a hands-free operation. The VOX function starts transmission when you speak
into the microphone, without needing to push [PTT]; then, automatically returns to reception when you stop
speaking.
L To use the VOX function, an optional headset (and connection cable, depending on the headset) are required. See the
WLAN transceiver's manual for details.
■ Multiple communication
WLAN transceivers can simultaneously make multiple communications in an IP1100CV system since crosstalk
does not occur in an IP network.
IP1100CV
Individual call
IP110h
IP1100CV
Wireless access point
Individual call
Wireless
access point
IP100h
1-7
Group call