Table of Contents
Advertisement
Connecting the Power Cable
1-6
User's Manual
This printer is equipped with an auto-switching power supply and can be
connected to either a
l
15VAC or 230VAC source without damage or manual-
ly changing a switch setting.
The allowable voltage variation is
±
15% and the allowable frequency is 48 to
65Hz.
A power cable is packed with your printer. Plug the female end of the cable
into the recessed connector at the rear of the printer. See Figure 1-6. Plug
the other end into a compatible, properly grounded AC outlet.
Avoid using AC circuits serving other equipment which may cause chronic
low voltage, noise interference, or power fluctuations.
Power cable Connection
Figure 1-6
:::,-i---+---FUSE
HOLDER
Nov 93
Advertisement
Table of Contents
