Table of Contents
Advertisement
Operator Troubleshooting
(continued)
Mechanical Problems
Use Table 3-4 when problems are experienced with paper feeding and print quality.
TABLE 3-4
Mechanical Problem•
PROBLEM
Paper does not feed properly.
Paper tearing. paper "walking'' out of
tractors, elongation of paper pin holes.
Paper Jammed.
(continued)
3-8
POSSIBLE CAUSE/CURE
■
Paper supply in lower enclosure not
aligned properly.
■
Paper snagging on box. Cut top of
box off.
■
Paper not loaded properly. Reload
paper and check all four tractors for
proper adjustment.
■
Excessive tension on paper.
Readjust paper thickness adjust lever.
readjust print gap adjust wheel, check
right side upper and lower tractors for
correct lateral paper tension.
■
Paper Jams are most often caused by
incorrect paper tension (see above) or
misaligned tractors or paper.
I. Tum the Print gap adjust wheel to
the LOAD position and physically clear
paper Jam.
2. Reload paper. readjust right side
tractors. paper tension. and gap.
3. Press TESf/CIEAR to print
buffered data and to clear display.
Nov 93
Advertisement
Table of Contents
