Table of Contents
Advertisement
Operator Troubleshooting
(continued)
Hard Faults
Nov 93
When a hard fault occurs, printing will stop and operator
intervention is required. Correct the condition causing the fault and
press the TEST /CLEAR pushbutton to restore printer operation.
DISPLAY
Fault:Low Paper
Fault:Paper Out
Fault:Paper Jam
Fault:Rlbbon
Fault:Rlbbon Jam
TABLE 3-2
Hard Fault Displays
MEANING
A
low paper condition exists. Press
TEST /CLEAR to proceed to low paper printing.
See "Low Paper Printing" on page
2-26
of
Chapter
2.
Paper supply is depleted. Load paper and set
top of form. Paper out sensor is reset when
paper is inserted in the lower tractors and
TEST /CLEAR is pressed.
No paper movement has been sensed by the
paper motion sensor.
1 - Turn
the print gap adjust wheel to the
LOAD
position and physically clear the paper
Jam.
2 - Reload paper and readjust right side
tractors, paper tension and gap.
3 - Press TEST /CLEAR to clear display.
Ribbon cartridge is missing. installed
incorrectly, or damaged.
Ribbon has stopped moving. Remove cartridge,
inspect, and try to reinstall.
3-5
Advertisement
Table of Contents
