Function And Program Modes - Genicom 4810 User Manual

Function and Program Modes
2-8
u,.,,r'•
Manual
Pressing the FUNCTION or PROGRAM pushbutton while offiine
causes the printer to enter that mode.
Function Mode
The Function Mode is used to gain information about the printer,
align and define forms, back paper out of the printer, and perform
maintenance and troubleshooting. The foldout diagram on the next
page shows the menu structure and the displays you can expect.
An explanation of the displays and their usage starts on
page 2-11.
Program Mode
The Program Mode uses an extensive menu of options to set up
and control the printer's operation.
The foldout diagram on page 2-10 shows the menu structure and
the displays you can expect. An explanation of the displays and
their usage starts on page 2-32.
While in the Function or Program Mode:
■ Pressing the NEXT OPTION (0) or PREVIOUS OPTION
(1)
pushbuttons causes the display to change to the next menu or
option.
■
Pressing the ENfER (4) pushbutton causes the printer to enter a
sub-menu or perform the operation showing on the display.
■
Pressing the EXIT (3) pushbutton causes the display to return
one step up the menu tree or to Local if already at the top
level.
■
Pressing the QUIT (2} pushbutton causes the display to leave the
Function or Program Mode and return to Local.
Nov 93