Local Auto View Feature - Genicom 4810 User Manual

Local Auto View Feature
Nov 93
The local auto view feature is used to view the last line printed
through the glass in the top cover. Printer option strap B23 must
be IN to enable this feature. See Appendix F for information about
changing strap settings.
Viewing
When the printer is switched from Online to Local at the control
panel, the paper will move up until the last printed line is at the
pointers of the upper tractors.
Retracting
When the printer is switched back to Online, the paper will move
down until
it
is positioned at the print wires ready for printing.
The paper will also be retracted if either the Program or Function
Modes are entered and when the TEST/Cl.EAR pushbutton is
pressed and held.
When this feature is enabled, the paper may or may not move
immediately when the SET TOP OF FORM pushbutton is pressed.
Depending on the printer's condition (active or idle).
it
may not
retract the paper until the ONUNE pushbutton is pressed.
Chapter 2 Operating the Pnnter
2-31