Table of Contents
Advertisement
Unlike the other input trays, the MBF cannot automatically detect the paper size being used.
Therefore, whenever using the MBF, you must set the Media Size and Media Type settings in the
Paper Menu to match the media you are using. The factory default settings are:
Media Size = Letter
Media Type = Plain.
When using the MBF as another input tray, the MBF will automatically select single sheets as
needed. When using the MBF in Manual Feed mode, the user must manually insert one sheet at
a time, or if multiple sheets are inserted, press the Start/Stop pushbutton to allow each sheet to
be fed.
Connecting the Parallel Cable
Attach an optional parallel cable to the parallel port on the rear of your printer.
1.
Attach the other end of the parallel cable to the parallel port on your PC or workstation.
2.
Connecting the Ethernet Cable
Attach appropriate cable to your Ethernet hub.
1.
Attach the opposite end of the cable to the ethernet port on the printer.
2.
Connecting the Power Cord
Connect the printer to an AC outlet as described below.
WARNING: To prevent the risk of electric shock, never touch the power cord or plug with
wet hands.
CAUTION: When disconnecting the power cord, always grasp the plug and do not pull at the
cable. Damage to the cord can lead to fire and electric shock.
Do not plug the printer into an AC outlet with incorrect voltage.
Do not use any multi-extension cord connector otherwise there is a risk of fire and electric shock.
Do not use extension cords with rated current less than 124V 15A. Never use extension cords with
low capacity, or extreme heat or flame may result. Consult your dealer on the correct type of extension
cord to use.
Do not damage or modify the extension cord. Also, do not bend, pull, or place heavy objects on the
extension cord otherwise the extension cord may be damaged and result in fire hazard or electric
shock.
See "Safety Notes" on page B-2.
Sep 01
GENICOM LN45 and Intelliprint mL450 Installation Guide
Genicom
For standard configuration
Publication No. GEG-99122
1-15
Advertisement
Table of Contents
Troubleshooting
