Table of Contents
Advertisement
About the Ribbon Cartridge
The top side of the ribbon cartridge has a window for viewing the ribbon
fabric, the yellow SPOOL knob for taking up slack in the ribbon, and an
orange SLIDE LEVER used to position internal parts. A removable shipping
tab is located in the window on new cartridges. The bottom side has an
opening for the ribbon deck drive gears and locking lever. When the ribbon
is installed, the locking lever and ribbon drive knob will pass through the
openings in the top side of the cartridge. Some ribbon cartridges have a
reinker for longer life. The reinker lever should be rotated clockwise after
the ribbon installation.
ORANGE SLIDE LEVER
(FAR LEFT POSITION
FOR INSTALLATION)
Figure
1-15
YELLOW SPOOL KNOB
(TUAN CLOCKWISE)
OPENING FOR RIBBON
DECK LOCKING LEVER
About the Installation
RIBBON CARTRIDGE
I / /
z_
PARALLEL
IMPORTANT
_,,,. DECK
!
/
/
LEFT SIDE CUTAWAY VIEW
1-16
User., Manual
During installation, hold the ribbon car-
tridge so the bottom of the cartridge and
the top of the deck are parallel to each
other. See Figure 1-16.
Figure
1-16
Nov 9:1
Advertisement
Table of Contents
