Preparing the Printer for Operation
Nov93
Printer unpacking is complete when all accessories have been removed from
the packaging and pedestal.
Move the printer to a suitable operating location. See Appendix C for
considerations on the space and conditions required for normal operation.
The two front casters have locks to stabilize the printer once it has been
moved to its location. Press one brake tab to lock the wheel of the caster and
press the other tab to unlock. See Figure 1-5.
Right Front Pedestal Caster Shown ln Locked Position
Figure
1-5
Important:
For the initial setup of your printer, carefully follow the
instructions of this chapter in the order they are presented.
Chapter I. Getting the Printer Up and Running
1-5