Horizontal Positioning Of The Paper - Genicom 4810 User Manual

Hide thumbs Also See for 4810:
Table of Contents

Advertisement

Horizontal Positioning of the Paper
4A0659P01
The column indicator label is located directly above the lower left tractor. See
Figure 1-13. Use this label as a guide to position the paper horizontally
within the printer. Unlock and slide the tractors sideways to align the paper
as needed. This positions the paper for the first physical print column.
A left margin is set electronically through either the control panel
pushbuttons or a command sent by the host.
The marks on the label are set up for paper with a 1/2-inch margin or
perforation strip and for printing at 10 cpi. When using paper with a
different edge width or when printing at a different cpi value, use the H's
printed on the label as a guide.
Aligning the edge of the paper with the first mark, as shown below, will cause
the first column to print immediately after the perforation strip. (See the H's
on the on the first line and the label.) Aligning the edge of the paper with the
mark labeled 6 will cause the first column to print 1 inch from the edge. This
position is column 6 on the paper after the perforation strip.
PLACE EDGE OF PAPER HERE TO PRINT ,
U
J I COLUMN 1 WILL ALWAYS PRINT HERE.
IN COLUMN 1 WITH A 1/2-INCH MARGIN.~
~
111
61
1
.
I I I I
I I I I
O
HHHHH
PRINf POSIDON USING MARK
#
1
PRINT POSIDON USING MARK #6
PRINf POSIDON USING MARK
#
11
-
Column Indicator Label and Lower Left Tractor
Figure 1-13
1-14
User·• Manual
Nov93

Advertisement

Table of Contents
loading

This manual is also suitable for:

4840

Table of Contents