Connecting The Parallel Cable - Genicom Intelliprint ML450 User Manual

1-14 GENICOM LN45 and Intelliprint mL450 User Guide

Connecting the Parallel Cable

Adjust the length guide to the paper length.
8.
NOTE: Make sure the guide stopper is locked firmly in the guide hole on the bottom of the cassette.
Adjust the guide to the paper size correctly otherwise paper may not be transported correctly
and may result in a paper jam.
Insert a correct paper size label into the paper size slot on the cassette, then push the cassette all the
9.
way back into the printer until it latches.
Connecting the Parallel Cable
Attach an optional parallel cable to the parallel port on the rear of your printer.
1.
Attach the other end of the parallel cable to the parallel port on your PC or workstation.
2.
Publication No. GEG-99126
Genicom
Aug 01