Connecting To The Computer; Connecting To The Power - Genicom 930 User Manual

Connecting to the Computer

Note: An IEEE 1284-compatible parallel cable is
needed. FCC regulations require the use of a
shielded cable no longer than 6 ft. (1.8 m).
If you purchased the Serial Interface accessory,
see the instruction sheet provided with it.
1. Plug the interface cable into the parallel port (Ê) and
secure it with the wire loops.
2. Attach the other end of the cable to your computer.
Ê

Connecting to the Power

1. Make sure both the printer and the computer are
OFF.
2. Plug the power cord into the back of the printer (Ê), then
into a grounded outlet (Ë).
Ê
3. Turn the printer on.
Ë
Getting Started E-5