Engine Drive; Automatic Mains Failure (Amf) - Deif SGC 420 Mk II User Manual

6.2.2

Engine drive

You can use the SGC to control one engine. The controller has all the necessary functions to control and protect an engine.
To use the controller to control an engine, go to Generator > Alternator Configuration in the smart connect
software. Select No for the Alternator Present parameter.
GOV
CAN bus
6.2.3

Automatic mains failure (AMF)

G
NOTE You can place the CT on the line from the genset or on the load side.
The AMF function is active when:
• Site monitoring, cyclic mode, and auto exercise are not enabled.
• Mains monitoring is enabled.
User manual 4189341360A EN Page 54 of 99