Table of Contents
Advertisement
4. Smart Connect Mk II software
4.1
Download the smart connect software
The SGC Smart Connect Mk II is the software interface between a PC and the controller. The software is free to download.
Download it from www.deif.com
4.2
USB connection
You need a USB cable (USB A to B) to connect the controller to a PC.
1. Install the smart connect software on a PC.
2. Use the USB cable to connect the controller service port to the PC.
3. Start the utility software.
4. Select the correct firmware version for your SGC Mk II controller.
5. You can see the connected device in the bottom left corner of the smart connect screen.
4.3
Smart connect interface
4.3.1
Top toolbar
Configuration
You see this top toolbar when you have selected one of the tabs from the Select Module menu.
1. New
• This creates a new smart connect file. All settings and parameters are reset, and your data is not automatically
saved.
2. Batch
User manual 4189341360A EN
Page 24 of 99
Advertisement
Table of Contents
