Table of Contents
Advertisement
7.8
Language
7.8.1
Language pack
The controller can show several languages. The default master language is English, which cannot be changed. Different
languages for the controller display can be configured with the smart connect software
Tools > Language Pack
Parameter
Select Active
Language
You can also upload a language pack to the smart connect software and write this to the controller. Click on the Add button
to add a new language pack. To remove a language pack, click on the Remove/Load Default button.
Configure the controller language
1. Select Language Pack from the tools menu on the left.
2. Select the language from the Select Active Language drop-down list.
3. Click the Write Language Pack to device icon.
Language Pack menu
1. Save a language pack file.
2. Open a new language pack file.
3. Write the language pack to the SGC controller.
4. Read the language pack from the controller.
You can also use the drop-down menu for the language pack found in the top toolbar. You must have selected the
Language Pack tab from the Tools menu to see this drop-down menu.
7.8.2
Smart connect language
The smart connect software can show several languages. The default master language is English, which cannot be
changed. Different languages for the software can be configured.
User manual 4189341360A EN
Range
English
Default
English
Description
Select the language shown on the controller.
Page 73 of 99
Advertisement
Table of Contents
