Table of Contents
Advertisement
Hazardous live currents and voltages
Do not touch any terminals, especially the AC measurement inputs and the relay terminals. Touching the
terminals could lead to injury or death.
Current transformer danger
Electrical shock and arc flash
Risk of burns and electrical shock from high voltage.
Short all current transformer secondaries before breaking any current transformer connections to the controller.
Factory settings
The controller is delivered pre-programmed from the factory with a set of default settings. These settings are based on
typical values and may not be correct for your system. You must therefore check all parameters before using the controller.
Electrostatic discharge
Electrostatic discharge can damage the controller terminals. You must protect the terminals from electrostatic discharge
during the installation. When the controller is installed and connected, these precautions are no longer necessary.
1.4
Legal information
Warranty
Warranty
The controller is not to be opened by unauthorised personnel. If opened anyway, the warranty will be lost.
Disclaimer
DEIF A/S reserves the right to change any of the contents of this document without prior notice.
The English version of this document always contains the most recent and up-to-date information about the product. DEIF
does not take responsibility for the accuracy of translations, and translations might not be updated at the same time as the
English document. If there is a discrepancy, the English version prevails.
Copyright
©
Copyright DEIF A/S. All rights reserved.
User manual 4189341360A EN
DANGER!
DANGER!
NOTICE
Page 7 of 99
Advertisement
Table of Contents
