Engine Drive; Automatic Mains Failure (Amf) - Deif SGC 421 User Manual

4.2.2 Engine drive

You can use the SGC to control one engine. The controller has all the necessary functions to control and protect an engine.
To use the controller to control an engine drive, go to Generator > Alternator Configuration in the smart connect
software. Set Alternator Present as No.
GOV
CAN bus

4.2.3 Automatic mains failure (AMF)

G
NOTE You can place the CT on the line from the genset or on the load side.
The AMF function is active when:
• Site monitoring, cyclic mode, and auto exercise are not enabled.
• Mains monitoring is enabled.
User manual 4189341355A EN Page 52 of 92