Description Of Controls; Switching The Appliance On And Off - Angelo Po 0N1CP1EL User Manual

ENGLISH
The appliance is fitted with the controls for use
of its main functions.
Power level knob: to adjust the heating in-
A)
tensity to one of the three levels.
Hot water tap: for regulating the water flow.
B)
B
Lighting
Operate the appliance's master switch to
1)
connect it to the electrical mains.
Fill the well ( see pag. 19).
2)
NOTE: Before filling the tank, make
sure the drain lever is on "CLOSED" .
Turn the knob (A) to setting 1 to turn on the
3)
heating elements at the maximum power
and bring liquids to the boil more quickly.
The mains light (D) comes on.
Turn the knob (A) to one of the other set-
4)
tings, to reduce the heating element power
to a lower level.
Turning off
Turn off the water supply (see page 19).
1)
Turn the knob (A) to setting 3 to turn off the
2)
heating elements. The mains light (D) will go
out.
18

DESCRIPTION OF CONTROLS

1

SWITCHING THE APPLIANCE ON AND OFF

Thermostat light: when on, indicates that
C)
the safety thermostat has tripped. The light
goes out once the appliance has been reset.
Mains light: comes on to indicate that the
D)
electricity supply is on.
ON/OFF marker
3
A
2
Power marker
1
1
A
1
Turn off the appliance's circuit breaker to di-
3)
sconnect it from the electrical mains.
IMPORTANT: Empty the well com-
pletely after use .
USE AND OPERATION
C
D
B
A
A
3
2
1
2
3
2
1 3
2
3
3320040_ut_GB_rev.3
C
D
D
3
2