ENGLISH
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts
10
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Countermeasures
• Prevent the appliance from
being powered acciden-
tally.
• Ensure that there is no
voltage
• Before commissioning the
appliance, check that all
electric connections are not
damaged
• Use a power supply cable
with the specifications indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance com-
missioning, check that
electrical connections are
securely fixed
• Before commissioning,
make sure that the appli-
ance and its metal acces-
sories are connected to a
system for equipotential
bonding
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
3320040_ut_GB_rev.3