Polycom VSX Series Administrator's Manual page 27

3. Select
and configure these settings:
Setting Description
Monitor 1 Select the video source(s) to display on Monitor 1. For more
information about how this setting can affect your display, refer to
VSX 5000
Video Source Output Examples for Multiple Monitors
VSX 7000
B-1.
VSX 7000s
VSX 7000e
VSX 8000
Monitor 2 Select the video source(s) to display on Monitor 2. For more
information about how this setting can affect your display, refer to
VSX 5000
Video Source Output Examples for Multiple Monitors
VSX 6000A
B-1.
VSX 7000s
VSX 7000e
VSX 8000
Visual Specifies whether to show content on the Visual Concert VSX
Concert VGA display.
Out
VSX 5000
VSX 6000A
VSX 7000s
VGA Out Specifies whether to show content on the display connected to
the system's VGA output.
VSX 7000e
VSX 8000
VCR Record Specifies the video source to be recorded to videotape or DVD.
Source
If Far is enabled, the recorded video will switch to the current far
VSX 7000s site speaker. If both Near and Far are enabled, the recorded
VSX 7000e video will switch between near and far sites depending on the
VSX 8000 current speaker. This selection is available only when you are
using a single monitor.
4. Select
and configure these settings:
Setting Description
VCR Specifies the VCR/DVD Player output format:
VSX 7000s • S-Video — Select if you have a VCR or DVD player
VSX 7000e connected to the system's S-Video output using an S-Video
VSX 8000 cable.
• Composite — Select if you have a VCR or DVD player
connected to the system output using a composite video
cable.
Displays and Cameras
on page
on page
3 - 5