Configuring The Cisco Callmanager For Use With The Vsx System - Polycom VSX Series Administrator's Manual

Configuring the Cisco CallManager for Use with the VSX
System
To support SCCP video calls, you must install a video plug-in on the Cisco
CallManager server. Signed and unsigned plug-ins are available for Cisco
CallManager at
http://www.polycom.com/resource_center/1,,pw-17246,FF.html.
You must also configure the Video Extensions in the Cisco CallManager. To
place multipoint video calls using the Conference feature, the Cisco
CallManager needs to be provisioned with video bridge resources.
To install the video plug-in:
1. On the Cisco CallManager server, double-click the plug-in file to start the
installation.
2. Follow the instructions on the wizard screens to complete the installation.
3. Restart the system to activate the plug-in you just installed.
To configure the Cisco CallManager:
1. In the Cisco CallManager, go to the Phone Configuration > Directory
Number Configuration screen.
2. Provision these settings for each Polycom Video Extension:
— Maximum Number of Calls: 1
— Busy Trigger: 1
After you have configured the VSX system and installed the plug-in, you can
place SCCP calls.
Networks
2 - 5