Using Dual Monitor Emulation; Examples Of Dual Monitor Emulation; Using Dual Monitor Emulation In A Call - Polycom VSX Series Administrator's Manual

Displays and Cameras

Using Dual Monitor Emulation

Dual Monitor Emulation is designed for rooms or offices with one monitor
only. Users see both near and far sites on one monitor in two different views.
During presentations, users see content and the near and far sites. What you
see during a call can depend on factors such as the VSX system monitor
configuration, the number of sites in the call, and whether content is being
shared.

Examples of Dual Monitor Emulation

Far site Near site
Call connects
Near and far site are the same size and
appear side by side.
Near site presses PIP
Size of far site window increases.
Near site presents to far site
Content, near site, and far site are
displayed in dual monitor emulation mode.

Using Dual Monitor Emulation in a Call

During calls using Dual Monitor Emulation without content, users can press
the PIP button on the remote control to scroll through the following screen
layouts:
1. Near and far sites, same size, side by side
2. Far site big, near site small
3. Near site big, far site small
4. Near site, full screen
5. Far site, full screen
The last layout viewed is used for the next call.
3 - 7