Configuring Audio Settings; General Audio Settings - Polycom HDX Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Configuring Audio Settings

General Audio Settings

4 - 6
To configure general audio settings:
1. Go to System > Admin Settings >Audio > Audio Settings.
2. Configure these settings on the Audio Settings screen:
Setting
Sound Effects
Volume
Incoming Video
Call
User Alert Tones
Mute Auto Answer
Calls
Enable Polycom
Microphones
Enable Polycom
StereoSurround
Description
Sets the volume level of the ring tone and user alert tones.
Specifies the ring tone used for incoming calls.
Specifies the tone used for user alerts.
Specifies whether to mute incoming calls.
Incoming calls are muted by default until you press the mute
on the microphone or on the remote control.
Specifies whether microphones attached to the system's
microphone input are enabled.
This option is automatically disabled if the echo canceller for
audio input 1 is enabled and Polycom StereoSurround is
enabled.
Specifies that Polycom StereoSurround is used for all calls.
To send or receive stereo audio, make sure your Polycom
HDX system is set up as described in
Microphones on page 4-1
page 4-4.
When you use an audio mixer with Echo Canceller
enabled, the stereo input is from the mixer only and the
Polycom microphones are disabled. If Echo Canceller is
disabled, the Polycom microphones are enabled and are
added to the audio from the mixer.
Connecting Polycom
and Connecting Audio Output on