Polycom VSX Series Administrator's Manual page 83
Hide thumbs
Also See for VSX Series:
- Administrator's manual (248 pages) ,
- Integrator's reference manual (156 pages) ,
- Getting started manual (48 pages)
Table of Contents
Advertisement
When you change this setting, the VSX system restarts. Every time a VSX
system is powered on or restarts in Security Mode, it verifies that the system
software is authentic Polycom software.
Points to note about Security Mode:
•
Global Management System™ and ReadiManager™ SE200 are not compatible
with VSX systems in Security Mode.
•
Software images for version 8.5 and later are digitally signed by Polycom. To
install an earlier version of system software, you must disable Security Mode.
•
If Security Mode is not enabled, the system first attempts to use a secure
protocol (such as HTTPS), but reverts to the non-secure form of the protocol if
the management system does not have a secure client.
•
If Security Mode is enabled, you must enter the room password to reset the
system (System > Diagnostics > Reset System).
Security
8 - 7
Advertisement
Table of Contents
Need help?
Do you have a question about the VSX Series and is the answer not in the manual?
Questions and answers